EECO_logo+tagline
T&B® BlueKote® LB17 90 deg Type LB Conduit Body, 1/2 in Hub, Form 7 Form, 4 cu-in Capacity, Gray Iron, Epoxy Powder Coated/Zinc Plated
T&B® BlueKote® LB17 90 deg Type LB Conduit Body, 1/2 in Hub, Form 7 Form, 4 cu-in Capacity, Gray Iron, Epoxy Powder Coated/Zinc Plated
T&B® BlueKote® LB17 90 deg Type LB Conduit Body, 1/2 in Hub, Form 7 Form, 4 cu-in Capacity, Gray Iron, Epoxy Powder Coated/Zinc Plated
T&B® BlueKote® LB17 90 deg Type LB Conduit Body, 1/2 in Hub, Form 7 Form, 4 cu-in Capacity, Gray Iron, Epoxy Powder Coated/Zinc Plated
Share Share Print Print
ABB

T&B® BlueKote® LB17 90 deg Type LB Conduit Body, 1/2 in Hub, Form 7 Form, 4 cu-in Capacity, Gray Iron, Epoxy Powder Coated/Zinc Plated

Short Description
T&B® BlueKote® Conduit Body, 90 deg Type LB, 1/2 in Hub, 4 cu-in Capacity, Form 7, Tapered NPT, Gray Iron, Epoxy Powder Coated/Zinc Plated, 4.6 in L x 1.35 in W x 2.2 in H
MFG #: LB17

EECO #: TBLB17

Brand: Thomas & Betts
UPC #: 786210924601
Attributes
Features
Documents
Product Information
Attributes
Finish
Epoxy Powder Coated/Zinc Plated
UNSPSC
39131708
Hub Size
1/2
Material
Gray Iron
Form Type
Form 7
Application
For connect sections, act as pull outlets when conductors are being installed and provide easy access for splices in branch conductors
Hub Location
90 Degree
Access Opening
Back
Connection Type
Tapered NPT
Type
90 deg Type LB
Capacity
4
Dimensions
4.6 in L x 1.35 in W x 2.2 in H
Features
  • Bluekote® Teflon based internal finish provides a slick, easy glide internal surface which significantly lowers the amount of force necessary to pull wires
  • Eliminates rough internal surfaces that can cut into cable jacket, insulation and conductors during pulling and also reduces installation time and risk of installer strain
  • Triple layer protection including two layers of epoxy coating which stops corrosion in its tracks
  • Bodies are designed with a flat back, allowing more cubic inch capacity
  • T and b form 7 bodies and covers are interchangeable with Crouse-Hinds and Appleton® form 7 bodies and covers
  • Conduit bodies make 90 deg bends in conduit runs, act as mounting outlets for wiring devices and lighting fixtures and to provide access to conductors for maintenance and future system changes
ABB_Thomas_Betts_00179_65_72_CAT
ABB_Thomas_Betts_00436_1_2_SPEC
IDW_DOCUMENT_c4cc90e904d8b3c9cac0fc5452d6acb094d863c9e7f252cbc381a8ac3422a062
ABB
everwhere
T&B® BlueKote® LB17 90 deg Type LB Conduit Body, 1/2 in Hub, Form 7 Form, 4 cu-in Capacity, Gray Iron, Epoxy Powder Coated/Zinc Plated